Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires provide a warm, comfortable form of warmth with no harmful gasses or soot. They are easy to install, just like an electrical fire.

The BARDA contract will support the development of the BioFire emerging CoV panel, which is a nucleic acid Amplification test that will be used with BioFire filmArray Systems for detection of human acoronaviruses in nasopharyngeal or samples as well as saliva samples.

Eco-friendly

A bioethanol fire is an excellent alternative to gas or wood fires. The fuel is created using plant by-products, and an organic process converts sugars into alcohol. It is a better choice than other fireplaces because it does not emit harmful emissions, and has a lower carbon footprint. Bioethanol is a better alternative to other types of fires since it doesn't emit smoke or soot. It also requires no flue, which means it can be placed anywhere in your home or garden.

Multi-drug resistant bacteria (MDR) are one of the most dangerous health threats of today. New testing methods can detect MDR bacteria early and prevent any further complications. BioFire FilmArray is one of these tests. This test utilizes a symptom-driven approach to detect the most frequent pathogens that cause sepsis. The results are available within an hour so that doctors can begin treatment right away.

Molecular PCR is a process that amplifies DNA or RNA molecules into millions or billions of copies. This allows for the analysis of small quantities of body fluids or tissues to determine whether certain genetic sequences are present. It is a valuable tool for laboratory professionals, and can help them diagnose serious illnesses in a timely and cost-effective manner. The BioFire film array PCR system is an innovative instrument for the diagnosis of infectious diseases. It can be used in a variety of locations, including hospitals and laboratories.

In the case of respiratory tests the simplest swab could be wiped over your nose and sent to the lab for analysis. BioFire’s system allows clinicians to respond quickly and with a short turnaround time. This means that there is less waiting for results and better outcomes for patients.

The Chanouf Farm Biofire company has developed an agroforestry recycling system that makes use of olive and pear waste to produce biochar and biomass power. The products are offered to the public to replace traditional coal briquettes and charcoal with eco-friendly alternatives. In addition the bio-waste products can be used to fuel a Kachelofen fireplace which produces radiant heat that is a green alternative to electric and gas-fired fireplaces.

Clean burning

When you use bio-fire - Click on meister21.com -, you're not just reducing energy consumption, you're also helping the environment by using a renewable fuel source. The combustion of bioethanol doesn't produce harmful gases such as carbon dioxide. It releases only water vapour and heat. This makes it a safer and cleaner alternative for indoor use.

Ethanol can be made by the fermentation of sugars in plants. It is an energy source that is renewable. It can be produced rapidly and will not run out as fossil fuels, such as oil and coal. The use of bioethanol also helps to reduce the dependency on imports from abroad and reduces the risk that come with supply shortages.

Bio-fires are easy to set up and can be used in existing fireplace openings or as a freestanding unit. This makes them a convenient alternative to wood and gas fires. They are a great option for offices and homes that do not have chimneys.

When a bio-fire is lit, a special media is created inside the burner that absorbs the liquid ethanol fireplace fuel while making it ready for combustion. The ethanol fuel is ignited in the flames, and the vapors are released into the air through the vent. This gives the flames a more natural appearance and a mesmerising beauty which can't be matched by gas or wood fires.

Another advantage of bio-fires is that they don't need vents or flues to replenish the oxygen consumed during combustion. They don't release carbon monoxide that is released into the room by gas fireplaces with open fronts.

The BioFire Respiratory panel employs multiplex PCR to simultaneously test for respiratory pathogens. It takes approximately an hour. This enables doctors to identify and rule out respiratory illnesses much faster than they can with conventional laboratory tests that require patients visits. This reduces time and costs for both the patient and the health care system.

Safe indoors

Bio-fires are safer to use indoors compared to real fires, since they produce no smoke, ash or carcinogenic fumes. The bio ethanol indoor fireplace-fires don't produce carbon monoxide that can be dangerous if breathed in. The bio-ethanol fuel they use is flammable you must be extremely careful when managing the burner and refilling your fire. The fuel should only be added after the burner has been turned off and your fire has been cooled. Any spills need to be cleaned up promptly.

The company's diagnostic FilmArray system, BioFire Torch and BioFire 2.0--are simple to use and can run eight different diagnostic panels approved by the US Food and Drug Administration as well as three additional panels approved for emergency use and six environmental test panel. These tests include a new respiratory panel that has been designed to quickly detect and discriminate between respiratory illnesses including COVID-19 as well as emerging coronaviruses.

Its COVID-19 panel has been granted a grant from the Biomedical Advanced Research and Development Initiative (BARDI) which is part of the US Department of Defense's Strategic Access Program. The COVID-19 test is an antigen-based method, allowing clinicians to distinguish between symptoms caused by COVID-19 and other respiratory infections with the same precision as rapid antigen tests currently in use.

In addition the company is working on a SARS-CoV-2 assay for its Respiratory 2.1 Panel. The multiplexed nucleic acid amplifying test will be available for use with the BioFire FilmArray 2.0 and Torch Systems, and will detect SARS-CoV-2 and 21 other respiratory pathogens in nasopharyngeal and saliva specimens within less than an hour. The test will be developed in an extremely short time frame, and FDA approval for EUA and 510(k), is scheduled to be granted by Q3 2020.

While bio-ethanol flame-effect fires are extremely safe to use, they should be kept away from combustible materials like blankets, curtains and cushions. They should not be placed close to anything that could catch fire. Keep flammable materials away from the flame-effect fires by at least 10 feet. The bioethanol fire insert fuel should be stored in a secure, dry area where it cannot be easily accessed by children or pets.

Simple to use

The bioethanol fireplace doesn't have a chimney to worry about. All you require is a secure location to place it in and some fuel. Once you've filled the burner, light it. This will create an appearance of a real flame. Once the flame is started it will heat the room but with little or no smoke. It will also produce heat like the wood-burning fireplace. bio ethanal fire fires are easy to maintain and don't require any maintenance other than a quick clean-up.

The BioFire RP2.1 Easy test unlike other tests that use the syndromic method of identifying typical signs of infection and symptoms, can provide results within 45 minutes. The test is designed for patients suffering from respiratory symptoms that are upper respiratory and has a 98% accuracy rate. The test can detect 19 viruses and three bacteria in one sample which makes it an excellent choice for patient management.

The BioFire system combines multiplex PCR testing, sample preparation, and result reporting into one integrated platform. This helps laboratories to streamline their workflow and eliminates the necessity for a sequential approach that requires a separate and send-out tests. This can lead to better outcomes for patients by allowing the right test to be utilized first time, and by eliminating the need for costly culture-based tests. The BioFire system is able to identify pathogens on a cellular level and their antimicrobial resistance gene. This information is more accurate than traditional methods.

Molecular diagnostics are being used to improve the care of patients and outcomes. The BioFire RP2.1 plus panel employs the syndromic approach to simultaneously target 23 of the most commonly involved pathogens in respiratory infections. The assay can be run on the BioFire FilmArray 2.0 and Torch systems and results are available in approximately 45 minutes.

The test is available in the US under FDA Emergency Use Authorization. It will be commercially available after the initial DoD requirements are fulfilled. The BioFire Defense team has created a fully automated sample-to-result assay for the rapid detection of COVID-19. This assay is in development and will be available once the initial DoD requirements are met.