Replacement Handles For UPVC Windows

UPVC window handles are available in various styles but all use the same locking mechanism. To replace a uPVC window handle, take off the top screw at the base of the handle. This will reveal two additional screws.

Next, measure the length of the spindle to make sure your new handle is a good replacement. It's important to determine what kind of handle you have because there are a variety of sizes.

Inline Espagnolette Handles

Espagnolette handles are found on most modern double glazed windows replacement glass. They are equipped with multi-point locks which provide greater security. They work by using the 7mm square spindle on the back of the handle, which connects with a gearbox on the inside of the window handles replacement frame, which turns multi-locks when turned. They are available in a variety including cranked, inline, key locking and cockspur handles. they are also available as a set to replace the handle that has been broken or worn out.

The uPVC handle replacement kits that we supply are designed to make replacing a damaged or defective window handle with a espagnolette easy. These uPVC handles include all the fixing screws and a range of spindle sizes to suit the majority of applications. They also come with key plugs to enable them to be changed from the standard open/close handle to the egress and fire escape locking handles (if utilized in conjunction with the proper key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Another alternative is our Yale Sparta 2 Inline Espag Handle which has been designed to be minimally intrusive with a lower base height. It is part the suited hardware range and is available with a variety of finishes that meet the requirements of BS EN1670:2007 Grade 5. They have also been tested for endurance and are suitable for use in coastal areas and with acidic timbers. They can be used with cylinder-immobiliser inserts to lock keys when required.

Cockspur Handles

Most often found often on older uPVC and aluminium windows the cockspur handle is a simple catch and latch arrangement. The handle's nose is closed onto or into the catch which is a plastic wedge block mounted on the window frame. As the wedges are available in different sizes, it is important to know the step height you need to buy prior to purchasing the new handle. Typically, uPVC frames come with a handle step of 9mm, while aluminium frames tend to use 21mm as the step size.

The cockspur handle is lockable with a key, providing security to your home. The lock is put into the handle by spindles that fit into the handle via the hole for locking (also known as a backset). The spindle is 7mm square and can be used either to open or close the window.

If you are replacing a handle for a cockspur, it is important to make sure that it has the same height for steps as the original. It is usually measured from the bottom of the spur on the handle to the underside of the handle's nose. This measurement is often referred to as the stack height or the backset. It is essential to be aware of this before placing an order for any handle.

Cockspur handles are available as straight/universal, cranked or left- or right-handed versions. This allows the handles to be positioned on windows that open from the left or right and also to allow the user a better access to the window.

It is important to check whether or not your window is required to have a restrictor designed to stop the handle being extended beyond a certain amount. Generally speaking, they are required for high-rise flats or commercial properties for security reasons. Most domestic homes don't require these.

There are a variety of different styles and colors of the cockspur handle, such as stainless steel brushed and white uPVC. Selecting the right one for your windows will depend on your personal preferences and style, and how you want your window to function.

Tilt and Turn Handles

Tilt and turn handles are a popular kind of handle which are commonly seen on double-glazed windows in the UK. Both timber and upvc ones feature them. The handle can be turned at any angle, including 180 degrees. This lets the window seal replacement be fully opened to the room, and it can also be lowered for ventilation. The handle is locked in this position, and requires keys to unlock the handle if required to open it.

This type of handle is able to be changed, since it only has one big handle, not a number of smaller ones. This can reduce the overall appearance of the handle and is more in line with the latest minimalist design trends. In addition they are much simpler to clean than casement windows, since the window is able to open inwards and is cleanable on both sides.

Another advantage of tilt and turn windows is that they are 4 - 8 times stronger than casement windows. This makes them ideal for larger windows as well as doors. The frames are also constructed from steel core which adds strength and durability.

The tilt-and turn mechanism is more secure than a casement, because the handle is locked in any position. This is especially important in areas with children as it keeps children from opening a window.

Many homes choose tilt and turn windows as they can be used in various ways. They can be opened horizontally like a normal window, or dropped down to a hopper style. This is a great choice for those who wish to increase airflow and reduce the noise that surrounds their home. They are also easy to clean and maintain since the glass is removed. These windows are available in various sizes and colors. They are a great addition to any type of home and complement both modern and traditional styles.

Crank Handles

Crank handles are simple to use and offer a great view of the outside without blocking the glass windows replacement. They are typically used in casement windows that hinge on the sides or windows with awnings. They are equipped with a mechanism similar to windows, with a linkage arm that is used to support the window sash which opens or closes by turning the handle in a clockwise direction. The mechanism of the crank window unlike other handles is often subjected a lot of wear and tear. This could result in the handle's gears to break or fall off the shaft of the operator. Regularly checking the handle of the crank as well as the operator mechanism will ensure that they stay in good shape for many years.

A crank handle is composed of a shaft made of metal that rotates perpendicularly and is attached to an arm. The arm is operated manually by grabbing it and turning it in a circular manner similar to how you use a pencil sharpener. In certain applications the handle could be operated via a leg.

The base of a crank handle is hollow. This allows the handle to be connected to equipment and machinery. The handle's arm also has a connecting rod, which converts the circular motion of the handle into rotary or reciprocating motion, which is used to operate machines and equipment.

Boats are often loaded onto trailers using crank handles, in addition to adjusting equipment and machinery. They're commonly made from stainless steel that is resistant to corrosion in marine environments. Most boat crank handles have been powder coated to protect against damage and make them easier to clean.

Replace the crank handle if it ceases to function or does not allow you to open the window. Before doing so check for trim mounting screws inside the window frame's track for screen. If there aren't any, try to loosen the casement cover using a strong putty knife by sliding it between the window jamb and the frame and pulling it. If that doesn't work you, remove it and get access to the crank by removing screws from the frame of the window.