double glazed windows repairs Glazing Lock Repairs

A good quality lock on your windows and doors can stop burglars from getting into your home. They aren't likely breaking glass or trying to squeeze through open windows.

However, some double glaze Window Repair glazing owners have had issues with their door or window lock after it's been installed. These issues can usually be fixed without the need for a new double glazing.

Broken or faulty locks

If your uPVC door or window lock is damaged or broken, then a locksmith can repair it for you. They can repair double glazing windows the striker plates, hinges, and locks on your double glazing. They can also adjust the cylinder's position to fix any misalignment issues that may be causing your handle to not work correctly.

If the key fits in the lock but it won't turn or is difficult to insert, then the mechanism may be seized up. Dirt or grease can get stuck in the mechanism. If this is the situation it could be possible for the lock to be cleaned and lubricated. Use a dry lubricant like graphite or Teflon and not oil, as oil can attract dirt and cause it to stick to the inside mechanism. After you have lubricated the lock, you should insert the key and then try to turn it. The lubricant should work through the mechanism and the lock should be able to turn with ease.

Screws that are loose within the lock mechanism can be another reason for a broken lock. They can loosen and fall out, or even break off completely, preventing the lock to perform as it should. A screwdriver is a tool to tighten these screws, but it is important not to tighten them too much, as this can damage the internal components.

A broken lock can be dangerous for both you and your family members, especially if you have small children. They could easily open the door without your knowledge, giving them access to your home. If you're worried that this might occur, a licensed professional locksmith can assist you secure the double glazing repairers-glazed doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing that can fix any type of defective and broken mechanisms handles, handles, cylinders, and lock systems on uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your particular needs, which means that in a lot of cases replacement windows and doors are not necessary.

Broken or Faulty Handles

As part of their overall security package most double-glazed windows feature a multipoint lock. This is a great choice for those who are concerned about burglars who are opportunistic and trying to gain entry into their home. Ask your installer about antilift blocks. They can be installed as an addition to the existing locks and will help keep your windows firmly closed.

Handle locks can be damaged or fail. They are the first component that a criminal will use to force open your window. Luckily, the good news is that this is one of the most simple parts to repair.

Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette that is designed to resist forced entry. This security upgrade is available as an option for new uPVC windows. As an upgrade option, older style uPVC or aluminium handles that are no longer used can be upgraded to a shoot bolt locking system.

If a handle is damaged, it's crucial to get it repaired as quickly as possible. The damaged handles could stop the window from closing properly and permit drafts to get in. It could also be a weak point that burglars who are opportunistic might exploit, putting your family and belongings at risk of being stolen.

The process of repairing the failed mechanism starts with getting access to the frame of the window and removing the broken handle. The gearbox that opens the handle is then accessed and the type identified so a replacement can be sourced which matches the profile of internal window frame mechanisms.

After the mechanism has been replaced the handle can be re-attached with the original screws - but we would recommend replacing them with longer ones since this will provide a more secure fit. The final stage is to apply a layer of clear sealant in order to protect the handle from further corrosion. After that, your window will be fully operational again, and at only a fraction of the cost of replacing the entire window.

Hinges that are Broken or damaged

If your windows aren't shut properly, draughts can get in, your home's security measures will be compromised and you run an increased chance of water damage or damp. Broken or damaged window hinges are a frequent problem that can be fixed easily.

If your uPVC windows won't open or close, it is likely that hinges need to be repaired or replaced. Most window companies will require that you purchase an entirely new window unit in order to resolve this issue, but we are able to replace the hinges and save you money.

Window hinges are often damaged by repeated use or weakened over time by corrosion. If you find a broken hinge, it's crucial to take precautions to avoid further damage by taking care not to push the window to open or close.

You can find the right parts for your hinge by identifying its model. The most commonly used types of window hinges include Maco, Mila, Roto and a variety of other brands. Consult a professional to avoid purchasing parts that won't fit with your existing hardware. This can cause more damage.

A damaged hinge can be a major issue for your uPVC windows and doors. They can be an important source of noise, and can also allow water to infiltrate your windows.

Make sure whether the pin barrels on both hinge halves are aligned. If not then tap the head pin using a hammer to make a shallow bend in the hinge barrel. This will help to keep the pin in place. Then, ask a friend to hold the door as you take the hinge screws and hinges from both the doorjamb and the door. Replace the hinges with ones that are the same size and then attach the screws using glue. Finally put the hinges in place using clamps or weights until the glue is drying.

Once your hinges are repaired after which you will be able to install the door and re-attach the handle. It is recommended to replace the screws using the same length of wood dowels as the screw that was originally used so that they match up with each one.

Broken or Faulty Glass

While uPVC windows do an excellent job of keeping cold out and warm in, they are susceptible to becoming damaged over time. This can include broken or damaged glass, as well as faulty locks. If neglected, this could turn into a major expense. It also can detract from the aesthetics of your home and could lead to a loss of insulation, so it is essential to fix any damage as soon as possible.

You can fix your cracked glass by yourself if your have the appropriate tools and techniques. Make sure that the area around the broken glass is free of debris so that any shards do not cause injury or cause a trip hazard. Remove all broken glass pieces and dispose of them in a proper way. Then, place masking tape over the entire area to prevent shards from scattering and sticking to your skin when you move them. If you're dealing with a double glazing repairs-paned window, it's a good idea pre-fit the pane of glass before gluing it back into place to ensure that you'll have enough space complete the task.

Use a clean, dry cloth to wipe down the surface of the broken glass and the frame prior to applying the glue. Follow the instructions for application and curing which may differ from one product to the next. Depending on the direction of the crack, you may want to hold the glass in place while it is curing. You can do this using lightweight clamps that are specifically designed to support fragile materials.

Once the adhesive is fully cure, carefully install the glass into the window frame, ensuring that it is flush with the edge of the frame and there aren't any gaps between the glass and the window sash. Avoid bending the glass as you put it back in place, as this could weaken the seal. This could lead to water infiltration or condensation.

If you have a glass door that's completely broken or has larger cracks, contact a professional glazier such as O'Brien(r) to arrange the replacement. Leaving broken glass unattended can be a risk to children and pets, so it's essential to act quickly.