Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft by using the Ghost Immobiliser. It is discreet and doesn't require additional key fobs.

The device makes use of buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin code sequence that can be changed up to 20 times. This will allow your vehicle to begin.

Simple process to change the PIN code

With the growing rate of vehicle theft, a lot of owners are seeking to improve their security. There are many different types of aftermarket security devices, from tracking systems to alarms and immobilisers. However, not all of these are equally effective in protecting your car. While a tracking system may assist you in locating your car in the event of theft, it will not prevent the crime from occurring in the first in the first place. Immobilisers, on the contrary perform exactly as they say on the tin: they shut off your car's engine so that it isn't able to be started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves steal your vehicle.

The ghost device makes use of the buttons on your car to create a unique sequence that must be entered in order for the engine to start. This can be done via the indicator stalk windows or heater buttons. Additionally it is possible to use an app on mobile that acts as an emergency PIN code override and allows the driver to operate the car without using the button sequence. This feature is particularly useful when you need to surrender your car for valet parking or servicing since the immobiliser ghost is active and not deactivated.

The Ghost is an innovative and unique device that works by using the buttons of your vehicle instead of as a separate unit. This means that it is not just a powerful security measure against theft from your vehicle but it can also be transferred over to any future cars you have, making it more valuable than the traditional lock on your steering wheel.

Small, weatherproof device

The Autowatch ghost immobiliser is a sophisticated security device that protects your car from key cloning, hacking and ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU over the CAN data bus to disable the engine. It can be plugged into the vehicle without the need for extra wiring and has been thoroughly tested to ensure it works with all vehicles. It is also immune to jamming devices, which are a common technique that car thieves use to circumvent immobilisers.

The advantage of using CAN data is that it runs silently when compared to conventional systems. It's not detected by sophisticated RF scanning or code-grabbing technologies and is likewise unreadable by conventional diagnostic tools. The Autowatch bmw m2 ghost installer doesn't produce LEDs, but instead utilizes the buttons inside your vehicle, such as the steering wheel or centre console panels to create a unique, changeable disarm sequence. You can make this sequence as long as 20 presses to provide additional security. The iPhone app is limited to one connection, using the Ghost's unique pairing code. the Ghost. All communication between the two devices is protected.

The range rover evoque ghost installer stops car thieves from adding an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. The engine will only run when a valid PIN code is entered. It is also possible to put it into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) to allow you to hand your car over to a valet service for servicing without the need to enter a pin code.

Every vehicle is tested

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects electronic signals to block the system of your vehicle from performing its normal startup routine until you input a custom passcode. The system can be turned on and off using your own smartphone application without the need for additional wires.

Standard factory immobilisers on vehicles function by using a transponder built into the key that transmits an indication to the ECU. The car will start if the correct code is sent. If, however, the transponder of a different vehicle is used instead, the immobiliser doesn't recognise it. This makes it possible for the vehicle to be stolen and started. The Ghost immobiliser has been developed by an South African company at the forefront of vehicle security systems technology. It guards you against key cloning or hacking, and even key theft. The only way thieves could take your car is physically towing it away and even then they wouldn't be allowed to drive it.

Ghost makes use of the buttons on your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to generate a unique PIN code that is changeable that needs to be entered before you can drive. This is performed without the need for additional hardware, such as keys-fobs, and can be as long as 20 presses long. It is also inaccessible to diagnostic equipment and does not transmit radio frequency signals, which means thieves cannot make use of sophisticated RF scanning or code grabbing technology to determine if a security system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is hidden within the vehicle so it can't be disabled or removed by thieves. It is even more difficult to get rid of than a car alarm, which requires disarming with an action sequence. This makes it a great complement to a GPS tracker which helps locate your car after it's been stolen.

Override of emergency PIN code

You don't have to look very far on social media to find stories or videos of vehicles that were stolen using the latest technology tools. This includes key-cloning and hacking tools that allow you to start your car without the original keys.

Our Ghost immobiliser combats this and gives you an additional layer of security to stop your vehicle from being stolen in the event of being targeted by thieves. It is created by creating an unique pin code sequence that is triggered by your buttons on the steering wheel, door panel, and centre console. This unique PIN must be entered along with your original key fob in order to prevent the vehicle from getting started. The unique override pin is located on a black card which you will receive following the installation. It is simple to remember since there aren't any LED indicators.

The device is hidden within the vehicle's wires, and does not emit radio signals, so it cannot be detected by modern criminals with diagnostic software that can recognise what type of security system you have installed. This makes it an excellent alternative to the tracker.

Contrary to most security systems that have an engine relay bay these CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependant). This allows them to disable a vehicle completely by sending an electronic block to the ECU and engine.

These systems can also be linked to an analog alarm, immobiliser or tracker. This should be decided prior to installation. They are also fully service/valet mode-compatible and a great alternative to a tracker when having your car stolen with ghost immobiliser in for repair at the dealer.

Service/Valet mode

In recent years there has been an increase in vehicles being stolen with the owners' keys. With easy access to key cloning equipment & door lock pick sets, it is now much easier for thieves to take your joy and pride. We have developed the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if you keys have been cloned.

It connects directly to your car's ECU (Engine Control Unit) via the CAN data loop. It is completely silent, because it does not utilize radio frequencies or key fobs. This means it cannot be detected by diagnostics or any other car hacking devices. It also protects against adding the key to a new one or replacing the ECU to bypass the system, since only the correct PIN code can allow the engine to start.

The device is hidden in your car and is reached via the buttons on your steering wheel, center console, and door panels. A unique and changeable PIN code sequence of up to 20 digits must be entered prior to being able to start your vehicle.

This is the first aftermarket immobiliser CAN bus that has been created that will stop your car from being driven away or started without a PIN code being entered first. If you're driving away with the device in motion, an indicator will appear on your dashboard and flash continuously for around 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to run just as normal. If you don't enter your PIN at this point, the indicator will continue to flash and require a new pin code every time you attempt to start your car.