Patio Screen Door Repair - How to Do it Yourself

A damaged or worn screen door is not just ugly; it's also a an ideal entry point for flies, mosquitoes, and other insects. Although there are services that can repair patio door your sliding patio door lock repair screen door, it is relatively easy to do the job yourself.

Lay the screen flat on a work surface. Take the handle off by taking out the screws that secure it.

Damaged Screens

It's not surprising that your window or door screens will eventually develop holes and tears due to weather, pets, and children. These damaged parts are not only ugly, but also allow pests and flies in your home. Fortunately, repairing the problem is fairly easy. While patch kits and screen repair tapes offer an easy solution for minor damage, they don't work well on more serious issues. This step-by-step guide will show you how to properly repair and replace your windows and doors for screen.

The first thing you need to do is assess the damage. Can the frame be repaired or does it require to be replaced? It is important to take into consideration this since window and door screens frames are more susceptible to being damaged than mesh. A bent frame could cause the screen to be out of alignment, causing holes or weak spots.

After you've decided whether the frame is salvageable then you can begin to tackle the mesh. To accomplish this you'll require some essential tools. This procedure requires a spline roll for pressing the spline into the frame, an utility knife and a pair of scissors. These tools will ensure precision and durability when you make repairs.

If you are dealing with an extensive hole, start by removing as much of the old screen as possible to create a clean opening. Cut a new piece of screen material that is at least a half inch bigger than the damaged portion. If your window has grid pattern, make sure that the patch matches with it. Cut the edges to eliminate any imperfections. Fold over the edges of spline to conceal them.

When purchasing your replacement screen, make sure you take into consideration the climate of the area you live in. Fiberglass mesh is a popular choice due to its flexibility and cost and aluminum screens provide strength and snag-resistance. If your area is plagued by mosquitos and other pests You may want to choose a specialized mesh for insect screens. Whatever type of screen material you select, make sure you stretch it tightly across the frame to avoid wrinkles or sagging.

Broken Rollers

A broken roller can be a major issue. It can make moving the door difficult and allow insects to enter your home. The good news is that repairing the rollers isn't as difficult or costly as replacing your entire door.

Begin by looking at the rollers to determine what the problem is. It may be that the wheel has flattened out, or maybe one end of the wheel has worn out by constant contact with the track. The wheels are generally a push fit on the bracket, so you might be able to place a screwdriver behind the roller between it and the bracket, and try to lever it off. If you're still unable to remove the roller then spray the shaft with WD-40 and try again.

It's also a good idea to examine the tracks, both at the top and bottom. If they're bent, you can straighten them by putting a piece of wood against the bent area and beating it with a Hammer. It is crucial to wash the tracks well as they can be a source of dust and grit.

Once you've identified the kind of roller that's damaged, you can purchase a new one. Be sure to take your old rollers with you to the hardware store to ensure you purchase the right type. Some doors have more than one roller, so make sure to purchase enough rollers to replace them all.

Before installing the new roller, use a screwdriver to loosen the adjustment screws or bolts on the inside of the patio sliding door repair frame, close to the rollers. After the screws are loosened, you can remove rollers from the bottom. This is best performed by a person else so that you don't have to work with your hands.

Once the new roller is installed, the door can be raised and the bolts or screws that adjust can be tightened. Make sure to verify the alignment of the rollers and track, too. If everything is in the correct position your glass patio door repair screen will slide in place easily.

Frame Damaged

There are many ways you can fix your screen door to stop it from rubbing against the frame. Make sure the hinges are secure. Loose hinges can cause doors to bind, which means it will stop when you open or close the door. If they're loose make sure you tighten the hinge screws. If this isn't working, you might need to sand the top of the frame.

Another issue that is common to screen doors is a rotting frame. It can be expensive to repair, as it typically requires replacing the entire frame. To avoid this, keep a eye out for signs of rot and treat them immediately if you notice them. Check for signs of decay by observing wood that appears darker than the rest of the frame. Keep an eye out for areas where the wood has started to bow or warp. Contact a professional if notice any of these issues.

A mesh patch kit can be used to fix damaged frames. The cost of these kits is between $2 to $7. The kit includes a small piece of mesh and glue that you can use to fill any holes in your screen. If the damage is not too significant it is possible to attempt to repair it using a wood filler. To accomplish this, you'll have to apply the wood filler to the damaged area and then wait for it to dry before sanding it smooth.

For a more permanent solution, you can buy frames lifts. A frame lift is a steel structure that bolts to your frame and raises it up. This is a very expensive option, but can be the most effective option if your frame is badly damaged or rotted.

To make a simple stand for your screen door you can make an edging from a piece of wood or even a photo frame display stand. Then, attach a wire or brackets to the back of the frame to hang it on the wall. You can even add a piece of felt to the frame's bottom to shield your wall from scratches.

Broken Splines

A damaged screen spline can be the same as damaged frames or doors. It may appear to be a minor issue that can be ignored however, ignoring it long enough can allow pests such as mosquitoes and flies to get through. This can quickly become an issue that is more serious and could cause more costly repairs or even a replacement screen door.

It is not difficult to repair a damaged screen spline when you have the proper tools. You will first need to take off the old spline from the screen door. This can be done by placing the frame flat on a work surface, such as a table, or the ground. Pull the spline out using the screwdriver. If the spline is particularly damaged or worn, you could discover that it breaks when you attempt to remove it from the groove.

When you are removing the old spline make sure you take off the caulking that was that was used to hold it in place. This will help ensure that the new spline fits properly in the grooves.

Make use of a utility knife to trim the screen around the frame after you have removed the old spline. This will ensure a tight and smooth fit across the entire frame once you have installed the spline.

When you have a clean frame and have the new screen material cut to size, it's time to install the new spline. Start by putting it on one of the shorter sides of the frame. Roll the spline into the screen channel using your splining device. Continue to roll the spline, bringing it in as you move. Continue this process for each side of the frame. While you work, apply spring clamps or tape to keep the screen taut.

Once you have splined all of the short sides of the frame, move to the other side and repeat the process. Then, you can finish by splining both the top and bottom edges of the frame.