Choosing the Right Window Handle For Your UPVC Window

Selecting the correct window handle is vital to having a properly-fitting uPVC window. You'll need a style that's not only functional but also matches the style of your home.

Making changes to a uPVC window handle is very simple. It takes only a few minutes and the tools below.

Metal

The window handle made of metal can be a decorative touch and is an essential piece of hardware that can increase security in your home. A variety of window handles are available, which can be fitted to a variety of frames and materials. Certain designs are specifically created for sash windows in order to in making opening and closing the window easier and less likely to jam. There are many metal locking mechanisms that prevent the window being opened past a certain point.

The most commonly used kind of window handle for UPVC is the epag patio door handle. They have a spindle mental at the back that is connected to the frame of the window and is the motor for the window mechanism. Both UPVC and aluminum windows have them.

Cockspur handles are another popular type of window handle typically found on older UPVC windows. They can be more difficult to use than modern Espag handles since they are based on a traditional peg locking mechanism.

Cam Euro Door handles are available for more sleek appearance. They have a sleek edge and are designed to fit with other types of uPVC windows. They are ideal for tilt and turn windows, where you can open the window from the bottom, while being able to open the top.

It is essential to take a number of factors into consideration when choosing new window handles made of steel including the step height as well as which way the handle turns. The distance between the underside and bottom of the screw plate is the primary factor to consider. The second one is the direction in which the handle will be rotated. Certain handles can only rotate in only one direction, like clockwise. Others can only rotate in the opposite direction.

Plastic

There are many different types of window handles made of plastic. They are all designed to operate windows and protect them from intruders. They are available in a variety of colours and styles to fit uPVC and aluminium windows. Some are constructed with a lock built-in. This increases security, allowing you to keep the window open and safe from intruders.

Different situations can trigger window handle problems. Sometimes, they may not be able to rotate correctly. This could be due to dust getting into the mechanism and causing dirt or a blockage. Another issue that is common is when the window handle starts walking tightly or clings to something. This is a sign the window handle is in need of attention.

It is crucial to speak with a specialist when this happens. They can help you resolve the problem quickly and effectively. They can also give guidance on how to replace a plastic handle with one that is more reliable and will work better.

Whatever type of handle you have most manufacturers will utilize the same fasteners. It's therefore easy to replace the window handle and lock using the exact model.

When it comes to finding the perfect replacement handle, it's best to know your current window size and design. This will help ensure that you purchase a handle that fits perfectly and won't cause any issues with your existing windows. Be aware of the size of the spindle - it's the distance that the handle's extends its nose from the base. This can be a vital aspect to consider if you wish to make use of your new window handle with a limiter installed.

Casement

Casement windows hinge on top and bottom like awning windows. However, they open in a horizontal direction to the left or right, instead of vertically. They are easy to maintain and offer a stunning view of your garden or yard. They also let in fresh air. They are a popular option for new construction and can also add architectural interest to older homes. Over time, they can become difficult to open or close due to worn-out equipment or worn out gears. In certain cases, window professionals may need to replace the crank mechanism.

Casement windows or awning windows are usually equipped with a crank and roto gear to allow the window to open and shut. They also have an locking mechanism that holds the sash in position when closed. The lock on a casement window works in conjunction with the bezel locks on the frame to secure the window. Many people overtighten their casement window's operating handle. This can cause the locking mechanisms to operate against each with the windows to be bind, and not close or open properly.

It is also normal for the handle of the window crank to get worn out over time. This can happen if the window handles for wooden windows was shut and opened repeatedly over a long period of time. It could also happen when the window was used as a prop while it was opened which caused the handle to hit and damage the crank shaft or gears.

Replacing a casement or the awning window crank is a straightforward DIY window repair. It could save you money over the course of time. The first thing you'll have to do is locate the screws used to mount the trim that keep the casement cover in place (Photo 3). Once you've unscrewed the screws then you'll be able to remove the old handle and inspect the inside of the crank mechanism. The gears can be lubricated again, but if they are already stripped, you might need to replace them.

Cockspur

Cockspur handles are usually found on older uPVC windows, as well as aluminum and timber. They are simple to operate, lock with the use of a key, and also provide protection against noise and cold from the outside. The handle opens to the outside when you press the lever. The cockspur's nose closes over the wedge striker in the frame which seals the window. By replacing both the handle and wedge of the cockspur, you will increase the efficiency of your double glazed front door handles-glazed windows and security.

The replacement cockspur handles are available for left and right-handed windows and can be operated by turning them 90degrees. They come with an'spur' which pushes against the PVC wedge on the frame of the window to create a secure closure. The handles are easy to install and are available in a variety of styles such as white, satin chrome, and PVD gold.

It can be difficult to determine the backset on the cockspur, particularly if you are replacing upvc window handles an old handle. This handle has been designed to solve this problem and comes with three packers of various thicknesses that can be placed on the underside of the handle nose to provide a variety of backset heights such as 9mm, 13mm, 17mm and 21mm.

The Schlosser Technik Apto is a top quality replacement cockspur handle which is suitable for a variety of applications ranging from 9mm to 21mm with flexible screw fixing centres. It also features key locking simple and simple to fit, available in a range of finishes and includes left and right hand versions.

This handle can be used to tilt and turn windows, but not side opening casement windows (which utilize a separate pivot and tilt). This handle can be used to replace damaged or old handles on uPVC and aluminium frames by using rivets instead of screws. This handle can be attached to the window frame using an edging gun.

Espagnolette

Espagnolette window handles, also referred to shootbolts or espagnolette locks are the locking mechanism that connects to the multi-point euro lock handles system within your uPVC windows. They are commonly found in older homes and provide both aesthetics and security. Espagnolette handles are offered with key-locking and non-key-locking mechanisms, and are available in both crank and inline designs. They can be straight or curving. The key-locking feature adds an additional layer of protection by preventing the handle from being opened from the outside using a thin screwdriver that is stuck between the frames. This is a typical burglary technique!

There's a wide selection of espagnolette handles available from here at GB DIY Store. Each has a distinct spindle length which protrudes out from the back of the handle, therefore when you are looking to replace your espag handles it is vital to measure the current handle's spindle size to ensure you get the correct size handle replacement. After you have measured the spindle length of your current handle, browse our selection of espag handles and find the right design for your windows.

We stock a fantastic assortment of white uPVC inline espagnolette handles available in both key-locking and non-key-locking options. You can choose from a variety of colours and spindle sizes to match your new handles with the frame of your window or the decor. Our espagnolette handles range includes classic and modern designs as well as contemporary styles. Each replacement handle is supplied with 5 different sizes of magnetic spindles that range between 15mm and 55mm, so you can easily attach the handle to your windows without having to buy the correct screw size!

A clever rosette on the back of the rose will ensure that the spindle only fits in the right spot and can only be inserted with the right-hand or left-hand lever, avoiding any mishaps. A metal spindle can also be used to secure the handle of an espagnolette. The handle is held in place using an innovative mechanism called a click-fit that is activated by turning the handle with a finger and making an audible "click".