Window Repairs

Window repairs can help homeowners save money and help keep their homes warm. In the event of major damages, like broken glass or a damaged frame, a replacement window may be required.

But many other issues can be repaired to extend the life of your windows. The most frequent issues are:

Broken or cracked panes

Cracked windows could be caused by a lawnmower that throws rocks in the wrong direction or a tree branch being blown by strong winds. It's not just visually terrible, but it could result in more energy costs because the broken pieces allow cold air into your house. It's fairly simple to repair windows with broken panes.

Begin by carefully removing glass with gloves and safety sunglasses. You may need use a utility knife to remove old glazing compound or putty around the frame's edges. Then, use a soft paper towel or cloth to wipe the glass's surface and the wood of the frame.

After the area is cleaned, apply a waterproof silicone caulking on the frame's perimeter. This will stop water from entering through the crack, which could cause further damage to the frame and the glass.

If you have double-pane glass cracks that are not treated properly could weaken the gas layer between the panes and render your windows less insulative. If the crack is significant enough to compromise the integrity of the glass, or if you have an inner pane completely missing, it might be the time to call an expert.

Cracks caused by thermal stress can occur when there's an extreme temperature difference between your home and the outside. The glass is then able to expand and contract. If the cracks are situated on two sides of a window, it is best to replace it instead of try to repair it.

If your windows are cracked and not yet ready to be replaced, clear tape can do a decent job of stabilizing the crack and preventing bugs from entering cold air. You can even cut an area of nylon stocking or tarp large enough to cover the crack and fix it with duct tape. This is not an indefinite solution, but it's a good way to keep insects and cold air away from your home. If your windows are older and you're beginning to notice cracks in the glass It's recommended to consult with the local upvc window repairs company to determine if replacing the entire window would be a better solution for you.

Rotten Wood

Wood rot is among the most frequent issues with windows. It can affect the appearance of a house and it can also pose a safety risk. However, it is possible to fix rotted wood. It is first necessary to address the cause of the wood rot. Examine for leaks in the roof and other places where water could get into the wood.

You will then need to remove the rotten parts of the window frame. This can be done using a claw hammer, chisel, or rasp. After removing the decayed wood, you'll need replace it with new wood. Pre-treated wood is recommended for this project since it will resist the onset of rot. If you are not able to replace the damaged timber, you can use wood hardener and filler to reinforce the damaged area. This kind of product will be available at most hardware stores. To achieve the best results, follow the directions on the label.

After you have replaced the rotten areas of the windowsill, it's important to protect the repaired area. Apply a water-resistant sealant to the wood. A product like Sikkens is a great choice for this job.

It is also possible to use an epoxy filler with two parts to protect the wood from further damage. It is easy to apply and provides a good finish. However, it is important to follow the directions for application on the label. After the epoxy filler dries, you can sand down the wood's surface. Start with a rough sandpaper, then move on to an easier grade.

The most important thing you don't want to do is make the area that has been damaged by exposed to more water. It is therefore recommended to cover the area that has been repaired with an oil-based primer which will help protect it from moisture. Then, you can reapply the wood sealant, which is waterproof.

The website won't work

There are many reasons windows won't open. Wood frames can warp when exposed to rainy weather, or the house could have settled or someone may have nailed it shut to protect themselves. But with some patience and the right tools, most windows that are stuck can be opened.

One of the main reasons for windows that won't open is accumulated debris or gunk on its moving parts. Grime and dirt build up on sliding tracks, hinges and locks over time, according to Acme Glass. Metal hardware may also rust if it comes in contact with humidity and direct sunlight. Spray grease on these areas can help prevent oxidation, and keep your windows functioning properly.

Stuck windows may be caused by the breaking or loosening of the pulleys that are used to lift and lower the window. These components can lose their tension and cause obstruction especially if the window is located two or more stories higher than the ground.

If you're having trouble opening a window, try using a pry bar to gently force the window to open a bit at one time. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Try running a hairdryer along the frame's edges for several minutes. This will warm the wood and make it easier to move.

A faulty spring can also be the reason for windows that aren't able to raise or lower. You will need to consult the owner's manual for more details depending on the person who made your windows.

If you have tried cleaning the moving parts of your windows and then lubricating them but they're still unable to open It could be time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows slip from functional to inoperable since windows that aren't properly closed can make your home vulnerable to burglary and water damage. Contact our team for more information about our replacement windows and services today!