Protect Your Pride And Joy With The audi rs6 ghost installer Immobiliser

Protect your pride & joy against theft with the ghost autowatch immobiliser Immobiliser. It's discreet and doesn't require additional key fobs to operate.

The device makes use of the buttons on your vehicle (steering wheel, door panels & centre console) to create a unique changeable pin code sequence of up to 20 presses. This will then allow the vehicle to start.

Simple PIN Code Change Process

With the growing rate of vehicle theft, a lot of owners are looking to improve their security. There are a myriad of security products that are available from tracking systems to immobilisers and alarms. However, not all of these are equally efficient in protecting your vehicle. A tracking system may assist you in locating your vehicle in the event of it being stolen however, it won't prevent the crime. An immobiliser, on contrary does exactly what it says on the label: it shuts off your car's engine so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to take your car.

By using the buttons that are already present in your car The ghost device is able to create an exclusive sequence that has to be entered prior to the engine can start. This can be accomplished using the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their vehicle without having to use the button sequence. This is especially useful if you need to hand your car over for valet parking or servicing, as the immobiliser will still be activated, but not disabled.

The Ghost is a unique and ingenious device that works in conjunction with buttons on your vehicle instead of being a separate device. It is not only an effective deterrent to theft of your vehicle however, it can also be used on any future vehicles you own. This makes it a far better investment than a conventional wheel lock.

Weatherproof tiny device

The Autowatch ghost immobiliser is an advanced security system that guards your pride and joy against key cloning, hacking and ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU over the CAN data bus to shut down the engine. It can be plugged into the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also indestructible to jamming devices, which is the most common method used by car thieves to circumvent the immobilisers in place.

The benefit of CAN data over conventional systems is that they operate in a silent manner. It cannot be detected using sophisticated RF scanning and code-grabbing technology as well as identified by conventional diagnostic tools. The Autowatch Ghost does not employ LED indicators but instead utilizes buttons in your vehicle, like the steering wheel, the centre console, or door panels, to create a unique sequences for disarming. The sequence can be extended by 20 or more presses for extra security. The iPhone app allows only one connection, using the Ghost's unique pairing code. the Ghost. All communication between the two devices is protected.

The Ghost stops car thieves from adding an ignition key replacement or replacing the ECU in order to bypass the immobiliser. The engine will only start when a valid PIN code is entered. It is possible to operate temporarily in the Valet/Service mode (with parameters set such as 30mph speed limit), so you can hand your car to an attendant or valet without needing to enter a code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that can be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device intercepts electronic signals to block the system of your vehicle from going through its normal initialization process until you enter the passcode you have created. The system can be activated and deactivated using your own smartphone app without the need for wires.

Standard factory immobilisers for vehicles function by using a transponder inside the key that sends a signal to the ECU. If the correct code is sent the car will begin, but if a transponder is replaced by one from another vehicle the immobiliser cannot recognize it. This enables the vehicle to start and be stolen. The ghost car immobiliser immobiliser was created by an South African company at the forefront of vehicle security systems technology. It safeguards your vehicle from key cloning, hacking and even key theft. The only way thieves could steal your car is physically towing it away and even then, they wouldn't be allowed to drive it.

Ghost utilizes the buttons of your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to create a unique PIN sequence that can be changed that needs to be entered before you are able to use your car. This is performed without the need for additional hardware, such as keys-fobs, and can be up to 20 presses long. It is also undetectable by devices for diagnosis and transmits radio frequency signals, which means thieves are not able to use sophisticated RF scanners or code-grabbing technologies to detect that an installation has been made.

Contrary to physical anti-theft devices such as clamps or wheel locks Ghost is concealed within the vehicle, so it cannot be taken away or disabled by thieves and is even more difficult to get rid of than a car alarm that requires disarming via an action sequence. This makes it a great alternative to a GPS tracking device which can be used to locate your vehicle after it's stolen.

Emergency PIN code override

You don't have to go far on social media to find stories or even videos of vehicles that have been stolen by car thieves employing the latest technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle with the original keys.

The Ghost immobiliser was designed to combat this, and give you an extra layer of security to prevent your vehicle from being targeted by thieves. It is created by creating an unique pin code sequence that is triggered by your buttons on the steering wheel, door panel, and the centre console. The unique pin code is entered alongside your original key fob to stop the engine from getting started. The unique override PIN is on the black card you will receive following your installation. It is simple to remember because there are no LED indicators.

The device is hidden within the vehicle's wiring and doesn't emit any radio signals, which means it can't be recognized by criminals using diagnostic software that can identify the security system you have installed. This makes it an excellent alternative to the tracking device.

In contrast to other security systems, which have an engine relay bay these CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependent). This allows them to disable the vehicle completely with an electronic block of commands that is sent to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems, but this has to be stated prior to the installation of the device. They also work with valet and service modes, and are a great alternative to a tracker device when you take your car into the dealer to address an electrical issue.

Service/Valet mode

In recent times, there has been a rise in the number of vehicles being stolen without the owners keys. It's now more easy than ever to steal your pride and joy thanks to the availability of key cloning tools & door lock picks. To combat this we are now offering the Autowatch Ghost immobiliser that prevents your vehicle from being driven even if your keys have been copied or your vehicle was stolen.

It directly communicates with your cars ECU (Engine Control Unit) through the CAN data circuit. It is completely silent, as it does not use radio frequencies or key fobs. This means it cannot be detected by diagnostics or other vehicle hacking devices. It also stops the user from using an ECU or key to bypass the system as only the PIN code allows the engine to start.

The device is hidden inside your car, using buttons on the steering wheel, the centre console and door panels. A unique and changeable PIN code sequence that can be as long as 20 digits must be entered before you are able to start your vehicle.

This is the first aftermarket CAN bus immobiliser that has been designed. It will prevent your vehicle from being driven or even started when you don't enter a PIN number first. If you're driving away with the device in motion the indicator will flash on your dashboard and flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to run just as normal. If you do not enter your PIN at this point, the indicator will continue to flash and will require a new PIN code every time you attempt to start your vehicle.